Short Description:
Product name:Inset (FATO) Final Approach & Takeoff Light
Power supply: AC220V, AC120V, DC12-48V or 6.6A
Rated power:10W
LED Life Time:100,000 Hours
Minimum Average Intensity:100cd
Color: White
IP grade: IP68
Downloads
ZS280 FATO Final Approach & Takeoff Light shell adopts die casting aluminum,it is good at waterproof and heat dissipation. The light resource adopt high quality LED and cooperate with advanced optical glass design, emitting angle meet FAA standard .They are used to mark and illuminate the FATO as well as to help the pilot locate the pad and safely land during night operations and inclement weather conditions.
The FATO light is used in place of an elevated heliport perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights are strong enough to drive over without damaging the light.
The fixture can be powered by the use of a constant current regulator, CCR, the same type used for airfield lighting. However, it is more common to see helipads powered by 230/120 volts AC. This option simplifies and the supply voltage required is available from the local power infrastructure. Should there be a requirement for the fixtures to be powered from a 24VDC supply this option is available upon request.
FATO lighting system is white lights should be used to define the FATO edge, with a minimum of 4 light fixtures per side of the square or rectangle, with a light being installed at each corner of the FATO area.
● Hermetically sealed optical assembly to mitigate condensation.
● With work stability, strong anti-interference ability and shock resistance.
● Engineered and designed to be universally compatible with any existing heliport lighting system.
● Mil-spec anodized cast aluminum body suitable for the harshest environments.
● With the anti-surge protection device.
● GREEN light – Steady burning.
● Pre-wired for quick and easy installations.
● Adopt independent encapsulation of high-power LED light source, which has the specific of high light brightness, long service life.
● IP68 compliant, water resistant fixture can be submerged in water for several days and still function properly.
● Impenetrable, factory epoxy potted LED driver and LED board cavity maximizes LED life.
● Waterproof gel wire connectors eliminate the need for crimping tools.
● Low profile, reduces the risk of damage to the fixture.
● Sturdy aluminum construction, stands up to heavy use.
● Standard hard anodized finish extends fixture service life.
● No RF-radiations.
|
Item |
ZS280 |
|
| ELECTRICAL
CHARACTERISTIC |
Max Intensity | ≥100cd |
| LED source | Imported white customized LED | |
| Light Source Service Life | 100000hours | |
| Emitting Color | White | |
| POWER SUPPLY | Optional voltage | AC220V, AC120V, DC12-48V or 6.6A |
| Average Power Consumption | 10W | |
| OPERATION | Working Mode | Steady-burning |
| Supply Frequency | 50HZ～60HZ | |
| MECHANICAL
STRUCTURE |
Net Weight | 5.2kg |
| Size | ø222mm(D)×115mm(H) | |
| IP Protection | IP68 | |
| Ambient Temperature | -40℃～55℃ | |
| Humidity | 0～100% | |
| Altitude | ＜4500M | |
| Cable methods | Bottom/side entry | |
1. Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.
2. When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.
3. Make sure the power supply can match the rated power of light before connecting.
