Short Description:
Product name:Inset Heliport Perimeter Light
Power supply: AC220V, AC120V, DC12-48V or 6.6A
Rated power: 5W
LED Life Time:100,000 Hours
Minimum Average Intensity:30cd
Color: Green
IP grade: IP68
Downloads
ZS270 TLOF Insert Perimeter Light shell adopts die casting aluminum,it is good at waterproof and heat dissipation. The light resource adopt high quality LED and cooperate with advanced optical glass design ,emitting angle meet FAA standard .They are used to mark and illuminate the TLOF as well as to help the pilot locate the pad and safely land during night operations and inclement weather conditions.
The Inset light is used in place of an elevated heliport perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights are strong enough to drive over without damaging the light.
The fixture can be powered by the use of a constant current regulator, CCR, the same type used for airfield lighting. However, it is more common to see helipads powered by 230/120 volts AC. This option simplifies and the supply voltage required is available from the local power infrastructure. Should there be a requirement for the fixtures to be powered from a 24VDC supply this option is available upon request
The new design of this Ground perimeter light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter and Obstruction lights are one of the most important safety features on your heliport. They are used to mark and illuminate the perimeter of your landing area (TLOF/FATO) to help the pilot locate the pad and safely land during night operations and inclement weather conditions.
TLOF lighting system is composed by green omnidirectional lights located on the TLOF boundaries: minimum of 14 lights for round areas or minimum 4 lights for square areas (maximum distance between beacons must not exceed 3 meters).
● Hermetically sealed optical assembly to mitigate condensation.
● With work stability, strong anti-interference ability and shock resistance.
● Engineered and designed to be universally compatible with any existing heliport lighting system.
● Mil-spec anodized cast aluminum body suitable for the harshest environments.
● With the anti-surge protection device.
● GREEN light – Steady burning.
● Pre-wired for quick and easy installations.
● Adopt independent encapsulation of high-power LED light source, which has the specific of high light brightness, long service life.
● IP68 compliant, water resistant fixture can be submerged in water for several days and still function properly.
● Impenetrable, factory epoxy potted LED driver and LED board cavity maximizes LED life.
● Waterproof gel wire connectors eliminate the need for crimping tools.
● Low profile, reduces the risk of damage to the fixture.
● Sturdy aluminum construction, stands up to heavy use.
● Standard hard anodized finish extends fixture service life.
● No RF-radiations.
|
Item |
ZS270 |
|
| ELECTRICAL
CHARACTERISTIC |
Max Intensity | ≥30cd |
| LED source | Imported green customized LED | |
| Light Source Service Life | 100000hours | |
| Emitting Color | Green | |
| POWER SUPPLY | Optional voltage | AC220V, AC120V, DC12-48V or 6.6A |
| Average Power Consumption | 5W | |
| OPERATION | Working Mode | Steady-burning |
| Supply Frequency | 50HZ～60HZ | |
| MECHANICAL
STRUCTURE |
Net Weight | 5.2kg |
| Size | ø222mm(D)×115mm(H) | |
| IP Protection | IP68 | |
| Ambient Temperature | -40℃～55℃ | |
| Humidity | 0～100% | |
| Altitude | ＜4500M | |
| Cable methods | Bottom/side entry | |
1. Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.
2. When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.
3. Make sure the power supply can match the rated power of light before connecting.
● Ensure that the power connection part is correct before using.
● Temperature rise when light working is normal phenomenon.
● The part of material of products is PC( like lamp cover and lamp shell ), so it cannot direct or indirect touch the organic solvent, such as industrial alcohol, banana oil, isotropic alcohol, carbon tetra chloride, cyclohexanone and so on, otherwise, the product will be corrosion.
● Pleasedonotlooklighthorizontallytoprotectyoureyeswhile thelightis working.
● Please make sure that the ambient temperature conditions should match this product. Otherwise it will not work properly.
● This product is a sealed structure; Please do not be tampered with by anyone other than registered installer. Once found, we are not warranty.
