Short Description:
The new flood light ZS130 is designed to meet the specific requirements of heliport operations,
ensuring that it delivers optimal performance in a range of different environmental conditions.
This innovative light is set to revolutionize the way heliports are illuminated, providing improved
visibility and safety for both pilots and ground personnel.
Power voltage: 220VAC, 48VDC，50~60Hz
Power Consumption:30–70W(optional)
Working mode: Steady Burning
Light source life：10000h
Materials:Lens-PC Body-Aluminum
LED Color:White
IP rate:IP66
Optional LED Color
Downloads
ZS130 Heliport Flood light has been specifically designed for helipads to provide uniform surface lighting where the TLOF and FATO lights need to be supplemented with floodlighting.
The Surface Floodlights are designed to satisfy all the ICAO required performances: they will provide the correct Touchdown and Lift-Off area illumination, as alternative or as integration of the perimeter lights, with a minimum of 10 cd/m2, the maximum height is 13cm, less than the required 15cm, to increase safety during hovering/ final approach operations, the two pivoting lamp holders provides the correct illuminations in any installation, aside from helipad shape and light positioning defenses on the lamp prevent the pilot from dazzling or direct light
The floodlights are normally installed along the perimeter of the Touchdown and Lift-Off area. They can be fixed on a special base by means of screws or bolts, or directly to the ground and must be carefully oriented, in order to achieve the most effective spreading of the light.
The LED optic is specifically designed for helipad operations, and distributes the light evenly across the wide helipad surface. The angle of tilt of the LED luminaire can be easily adjusted to focus the light on the helipad to maximize illumination. The optic hood further prevents potential glare to pilots upon approach and will help the pilot to obtain the right information about state and quality of surface. It will be easier to detect obstacles or objects present on the surface.This light will help to detect snow, sand, or other possible disagreements for pilots
Housed in a weatherproof, powder-coated yellow aluminium enclosure to withstand the harshest environments, the assembly has a low profile and is compatible with our standard frangible mountings.There are four mounting holes for easy installation on any surface.
● Optimized install with standard cable interface.
● High power LEDs and period of use of LEDs is minimum 75,000 hours.
● Light color: White – according to CIE Chromaticity Boundary.
● Floodlight hood eliminates glare to pilots.
● Pre-wires for quick and easy to installations.
● The orientation system is hinge type which can be orientated to the desired angle.
● The fitting can be bolted on any flat surface with a frangible coupling.
● With work stability, anti – electromagnetic radiation, anti – vibration, suitable for radar dense area.
● High-visibility yellow cast aluminum body, lens frame and mounting arm suitable for the harshest environments.
● Metal guard to protect the lens.
● With the anti-surge protection device.
● The disperser is made of transparent PC with excellent impact resistance, good thermal stability (temperature resistance of 500℃), good light transmission (up to 97% light transmission), UV protected and aging resistance.
● Their maximum height is 130 mm to increase safety during landing/take-off procedures.
● The degree of protection IP66.
● Nominal operating temperature from -30 to +70 °C.
|
Item |
ZS130 |
| Power voltage | 110-240VAC, 50~60Hz 48VDC |
| Light Source | High Power LED |
| Optical structure | Reflective optical structure |
| Power Consumption | 50W(optional 30W,70W or 100W) |
| Light source life | 10000h |
| Working mode | Steady Burning |
| Luminous Flux | 13000Lm |
| Emitting Light Colors | White |
| Body Material | Powder coated aluminum |
| Height above ground | Lower than 180mm |
| Overall Size(mm) | 235×180×160 |
| Packing Size(mm) | 240×190×120 |
| Net Weight | 1.3KG |
| IP Protection | IP66 |
| Temperature range | -30℃～70℃ |
| Gross Weight | 1.5KG |
| Humidity | ＜95% |
| Altitude | ＜4500M |
| Wind resistance | 80 m/s |
| color temperature | 6000K |
① Secure the light on a smooth surface which has enough strength with 4XM8 screws, if there is no mounting surface, we can customize special mounting bracket as request.
② When installation, please stay away the nearby light source.
③ Make sure the power supply can match the rated power of light before connecting.
④ Connect the power plug to the AC power, the light will start to work
