Short Description:
Product name:Low Intensity LED Steady Type or Flashing Type(Type A)
Input voltage: 85-265VAC, 50/60 Hz;12VDC; 24VDC;30-60VDC;
Effective Intensity: 10 Candela
LED Lifespan: 100,000 Hours
Materials: Lens-PC; Body-Aluminum
Optional LED Color
Downloads
Our QT10S LED omni-directional, red obstruction light is designed for marking tall structures such as buildings, towers, masts, cranes, meteorological towers, chimneys and other hazards to aircraft. This energy-saving LED light is a direct replacement for incandescent fixtures, providing years of reliable and maintenance-free operation. Available in single, double, and optional solar drive package.
LED low intensity aeronautical obstruction lights to meet the demanding requirements of offshore environmental conditions. The design is based on low power long life LED technology. The polycarbonate Fresnel lens concentrates and distributes LED light beams to output standard-compliant intensity and distribution. The efficient optical system and low-energy circuit design make the light only consume 2 watts. QT10S aviation light complies with ICAO regulation, low intensity Type A.
With a G3/4”universal threaded hub on the bottom, QT10S can be mounted on a conduit or with Lansing brackets designed for towers and buildings. There is a terminal block on its power board inside for wiring.
QT10S single aircraft warning light can be used on top of structures less than 45m. In most cases, multiple QT10S single low intensity aviation obstruction lights are installed in one or more horizontal levels for marking a structure’s outline with medium intensity obstruction lights.
• 1 pcs of 5W high power LEDs, reliable light source ensures long lifespan
• Lens made from durable, UV-stabilized LEXAN polycarbonate
• Aluminum base with powder painted, corrosion-resistant
• The efficient optical design provides excellent light distribution
• Internal LED driver and constant current regulator make the light illuminate steadily
• Aluminum heatsink provides excellent thermal dissipation performance
• G3/4 threaded bottom entry for easy mounting
• Multiple light elements in the source reduce the chances of a complete blackout which
could be caused in case of a single source failure.
• All hardware of obstruction lights are made of corrosion resistant metals.
• Stainless steel safety rope protects light head from fall-off during maintenance
• Bird spikes for protection against droppings.
• Photocell option for automatic activation at night
• No regular maintenance
• Uses 96% less power than an incandescent light
• With surge protection up to 2KV
• Excellent shock and vibration resistant
• No RF Radiations, EMC Compliant
• Protection: Polarity reverse, overvoltage and shortcircuit
• Corrosion resistant lamp & housing-suitable for off-shore use
• Flashing rate adjustable
• Both NO and NC dry alarm contacts are available, and it will give an alarm in case of power and light failure(optional).
• 2 years warranty
|
Item |
QT10S |
|
|
ELECTRICAL CHARACTERISTIC |
Effective Intensity | >10Candela |
| Vertical Divergence | 10 Degree | |
| Horizontal Divergence | 360 Degree | |
| LED Color | Red, yellow, white, green or blue | |
| LED Lifespan | 100,000 Hours | |
|
OPERATION |
Woke mode | Flashing |
| Flash Pattern | Flashing: 20/30/40/60FPM; Default: 40FPM;Steady burning | |
| Flash duration | 670ms | |
| Photocell sensitivity | 70-100 Lux | |
| Alarm type | NO & NC, dry contact relay | |
|
POWER SUPPLY |
Input voltage | 85-265VAC, 50/60 Hz;12VDC; 24VDC;30-60VDC; |
| Power consumption | 2W (Steady burning) | |
|
MECHANICAL STRUCTURE |
Lens | Polycarbonate, UV Stabilize |
| Body | Die-casting Aluminum | |
| IP Ingress | IP65 | |
| Weight | 0.54KG | |
| Operating | -40℃ ~ +55℃ | |
| Storage Temperature | -40℃ ~ +70℃ | |
| Wire Connection mode | Threaded 3/4” bottom entry | |
| Relative humidity | 0-95% RH non-condensing | |
| Wind speed | Up to 150mph(240kph) | |
|
OTHERS |
Warranty | 2 years |
| Optional | Flashing pattern(20–60FPM) Built-in photocell NO & NC, dry contact relay |
|
① Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.
② When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.
③ Make sure the power supply can match the rated power of light before connecting.
④ Unfasten the screws between housing and light base and open the housing, then the terminals appear.
⑤ According to the mark on the wiring label of the lamp lead wire, connect the power cable and the alarm wire correctly. Please pay attention to the polarity of the positive and negative poles for the DC voltage.
⑥ After finishing the connection, fasten the housing to the light body tightly.
⑦ Check whether the power cables are connected correctly before power on.
