Short Description:
Lansing low intensity aircraft warning light, designed to enhance safety and visibility
for aircraft in low-altitude flying zones. This cutting-edge product is equipped with
advanced LED technology, making it a reliable and energy-efficient solution for marking structures such as towers, poles, and buildings.
Input voltage:85-265VAC, 50/60 Hz;12VDC; 24VDC;30-60VDC;
Effective Intensity:>100 Candela
LED Lifespan:100,000 Hours
Materials:Lens-PC; Body- Aluminum
Optional LED Color
Downloads
Our DL100S low intensity aircraft warning light is compliant with industry regulations and standards, ensuring that it meets the necessary requirements for aviation safety. It emits a steady or flashing red light that is easily recognizable by pilots, providing a clear indication of obstacles in their flight path.
Designed for easy installation and maintenance, our DL100S warning light is built to withstand harsh weather conditions and operate with minimal downtime. Its durable construction and long-lasting LED bulbs make it a cost-effective choice for property owners and operators in need of a reliable aircraft warning solution.
With a low power consumption and an extended lifespan, our low intensity aircraft warning light offers a sustainable and long-term solution for marking obstructions in the airspace. Its compact and lightweight design makes it suitable for a variety of installation settings, from remote locations to urban environments.
Our DL100S warning light is designed to provide an additional layer of safety and visibility for aircraft, helping to reduce the risk of collisions with structures and enhancing overall aviation safety. Whether used for communication towers, wind turbines, or other vertical structures, our low intensity aircraft warning light is a crucial addition to any aviation safety plan.
Our DL100S low intensity aircraft warning light is the ideal solution for providing visual cues to aircraft operating at lower altitudes. Its reliable performance, compliance with aviation standards, and durable construction make it the optimal choice for property owners and operators in need of a cost-effective and sustainable warning light solution.
• Based on Led Technologies
• Available for both AC and DC conditions
• Can be operated in steady-burning or flashing mode
• Lens made from durable, UV-stabilized LEXAN polycarbonate
• Aluminum base with powder painted, corrosion-resistant
• G3/4 threaded bottom entry for easy mounting
• Multiple light elements in the source reduce the chances of a complete blackout which
could be caused in case of a single source failure
• All hardware of obstruction lights are made of corrosion resistant metals.
• Bird spikes for protection against droppings
• Photocell option for automatic activation at night
• No regular maintenance
• Uses 96% less power than an incandescent light
• With surge protection up to 2KV
• Excellent shock and vibration resistant
• No RF Radiations, EMC Compliant
• Reversed Polarity Protected(DC Type)
• Corrosion resistant lamp & housing-suitable for off-shore use
• Flashing rate adjustable
• Both NO and NC dry alarm contacts are available, and it will give an alarm in case of power and light failure(optional)
• Available both in single and double type
• 2 years warranty
| Item | DL100S | |
| ELECTRICAL CHARACTERISTIC | Effective Intensity | >100 Candela |
| Vertical Divergence | 10 Degree | |
| Horizontal out-put | 360 Degree | |
| LED Color | Red, yellow, white, green or blue | |
| LED Lifespan | 100,000 Hours | |
| OPERATION | Woke mode | Flashing |
| Flash Pattern | Flashing: 20/30/40/60FPM; Default: 40FPM;Steady burning | |
| Flash duration | 670ms | |
| Photocell sensitivity | 70-100 Lux | |
| Alarm type | NO & NC, dry contact relay | |
| POWER SUPPLY | Input voltage | 85-265VAC, 50/60 Hz; 12VDC; 24VDC;30-60VDC; |
| Power consumption | 10W (Steady burning) | |
| MECHANICAL STRUCTURE | Lens | Polycarbonate, UV Stabilize |
| Body | Die-casting Aluminum | |
| IP Ingress | IP65 | |
| Weight | 0.7KG | |
| Operating Temperature | -40℃ ~ +55℃ | |
| Storage Temperature | -40℃ ~ +70℃ | |
| Wire Connection mode | Threaded 3/4” bottom entry | |
| Relative humidity | 0-95% RH non-condensing | |
| Wind speed | Up to 150mph(240kph) | |
| OTHERS | Warranty | 2 years |
| Optional | Flashing pattern(20–60FPM)Built-in photocellNO & NC, dry contact relay | |
① Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.
② When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.
③ Make sure the power supply can match the rated power of light before connecting.
④ Unfasten the screws between housing and light base and open the housing, then the terminals appear.
⑤ According to the mark on the wiring label of the lamp lead wire, connect the power cable and the alarm wire correctly. Please pay attention to the polarity of the positive and negative poles for the DC voltage.
⑥ After finishing the connection, fasten the housing to the light body tightly.
⑦ Check whether the power cables are connected correctly before power on.
Note:
A. If the lamp has built in photocell, remember to cover the photocell with a black cloth if you test the lamp in the daytime, then the lamp will start to work.
B. If the lamp has GPS function, the fixture needs to be kept in an open area outdoor and the GPS function will work after 5-10 minutes.
