LANSING DL100 series is typically a standard LED Obstruction light designed for marking any obstacle that may present hazards to aircraft navigation. It made of die-cast aluminum alloy housing with polycarbonate dome and complies with ICAO regulation, low intensity TYPE C.
• Based on Led Technologies
• Customize for both AC and DC conditions.
• Customize for steady burning or flashing mode
• The visible distance is more than 12.5KM
• Multiple light elements in the source reduce the chances of a complete blackout which could be caused in case of a single source failure.
• All hardware of obstruction lights are made of corrosion resistant metals.
• Bird spikes for protection against droppings.
• Built in photocell, which can switch ON/OFF the lights automatically at dawn and dusk (optional)
• Use of quality components and sophisticated technology reduce chances of maintenance and replacement.
• Low power consumption, which leads to huge savings on electricity bills.
• LED light source ensures long lifetime, maintenance free
• Built-in anti electroplate impact module, with lightning/surge protection
• Resistant to shock and vibration.
• No RF Radiations, EMC Compliant
• Reversed Polarity Protected(DC Type)
• Corrosion resistant lamp & housing-suitable for off-shore use
• Bottom cable entry-ease of mount, mount accessories available
• Flashing rate adjustable
• With dry contact alarm, it will give an alarm in case of power and light failure
• Self-contained compartment-eliminates additional box
• Available both in single and double type
• 5 years warranty
| LIGHT OUT-PUT | DL100S(Single) | DL100DST(Double) | DL100DSS(Double) | |
| Effective Intensity | >100 Candela | >100 Candela | >100 Candela | |
| Vertical Divergence | 10 Degree | |||
| Horizontal out-put | 360 Degree | |||
| LED Color | Red,yellow, white, green or blue | |||
| LED Lifespan | 100,000 Hours | |||
| OPERATION | ||||
| Flash Pattern | Steady burning(default) or flashing mode(20-60 times/min) | |||
| POWER SUPPLY | ||||
| Input voltage | 85-265VAC, 50/60 Hz;12VDC; 24VDC;30-60VDC; | |||
| Power consumption | 12W (Steady burning) | |||
| MECHANICAL STRUCTURE | ||||
| Lens | Polycarbonate, UV Stabilize | |||
| Body | Die-casting Aluminum | |||
| Water-proof | IP65 | |||
| Weight | 0.9KG | 3.5KG | 3.5KG | |
| Dimensions(mm) | 159×245 | 340x413x140 | 340x413x140 | |
| Mounting Size | Threaded 3/4” bottom hub | |||
| Temperature Range | -40℃ ~ +55℃ | |||
| Relative humidity | 100% with condensation | |||
| Wind speed | Up to 150mph(240kph) | |||
| Warranty | 5 years | |||
| Optional | Available in flashing pattern(40FPM) Available with built-in photocell Available with built-in alarm relay contactsAvailable with GPS Synchronization function |
|||
• High rise building marking • Telecom tower marking
• Road obstruction marking • Wind turbine
• Port, dock entrance walkway • Bridge cranes
• Offshore gas&oil platform
