Short Description:
Input voltage: 85-265VDC
Output voltage: 48VDC
Number of Light output: 4*contact relay for lights and power
Photocell sensitivity: 70~100Lux
Photocell bypass: Auto/Manual adjustable
Alarm type: NO&NC,Dry contact alarm
Materials: Aluminum alloy
IP protection: IP65
Downloads
The CBL04B is an obstruction lighting Control box designed for controlling and monitoring Lansing LED low intensity and medium intensity aviation obstruction lights. Incorporated an AC/DC power converter, CBL04B allows users to input AC voltage (85-265VAC) and converts to 48VDC/24VDC/12VDC for electrical safety works. The user-friendly interface is intuitive for users to monitor operation status and easily configure functions and for monitor lighting operation system for the following failures: burned out lamp, photocell, power failure. & flashing rate control.
There are four light outputs (max. 1A load/output). Practically, for example, for input voltage 48VDC, each output connects one ZG2K or F864 medium intensity light, or up to three DL32/DL100 low intensity lights.
With a Form C dry alarm relay (NO&NC), the control box is capable of transmitting the obstruction lighting system’s failure to users’ alarm devices, when light failure, power-off or photocell failure.
A PT01 photocell is used for automatically switching on and off the obstruction lighting system from dusk to dawn,or we can put an internal photocell for easy installation if requires.
Bypass switch on interface panel allows users to bypass the photocell for permanently lightening or testing.
DIN-rail terminal blocks save wiring time and enhance wiring safety. A 2P circuit breaker is effective in protecting the control box from overload. A surge protector (reach 20KV) enhances protection against voltage fluctuation and lightning strikes.
CBL04B outdoor controller covered by an aluminum enclosure and assembled with cable glands, is a perfect IP65 model for harsh environment use.
• On/off Main Power Supply
• Control four lights flashing synchronously
• LED indicators for light and power
• “Service+Service”/”Service+Standby” adjustable when double lights used
• Four light-outputs, 1-4 selectable upon actual application
• Each light output load maximum 1A
• Steady and Flashing adjustable
• External photocell with prewired shielded cable, easy to maintain
• Photocell bypass switch—can switch ON/OFF the light when the photocell is not available
• Din-rail terminal blocks save wiring time and enhance wiring safety.
• Four dry contact relay ( NO&NC) for alarm output of lights, power and photocell
• Circuit breaker against overload and short-circuit
• Surge protector(up to 2KV) against voltage fluctuation and lighting strikes.
| Item | CBL04B | |
| POWER SUPPLY | Input voltage | 110-265V AC |
| Output voltage | 48V DC | |
| Numbers of Light Output | 4 | |
| Max.Load/Output | 1A | |
| Flash Rate | Steady/Flashing(20FPM), adjustable | |
| Photocell sensitivity | 70-100 Lux | |
| Photocell bypass | Auto/Manual adjustable | |
| Alarm type | NO & NC, dry contact relay | |
| Numbers of Alarm Output | 4*contact relay for lights and power | |
| Surge Protection | 20KV | |
| MECHANICAL STRUCTURE | Enclosure Type | Outdoor |
| Enclosure Material | Aluminum alloy | |
| Protection | IP65 | |
| Net Weight | 3.5kg | |
| Dimension (H*W*Depth) | 350*300*120mm | |
| Operation Temperature | -30°C~+70°C | |
| Operation Humidity | 0-95% RH non-condensing | |
| Mounting | Wall mounting or U-bolt mounting | |
Mounting dimension(mm)
