Short Description:
Input&output voltage: 48VDC
Number of Light output: 2*contact relay for lights, power and photocell
Photocell sensitivity: 70~100Lux
Photocell bypass: Auto/Manual adjustable
Alarm type: NO&NC,Dry contact alarm
Materials: Aluminum alloy
IP protection: IP65
Downloads
The CBL02A is an obstruction lighting Control box designed for controlling and monitoring Lansing LED low intensity and medium intensity aviation obstruction lights. The user-friendly interface is intuitive for users to monitor operation status and easily configure functions and for monitor lighting operation system for the following failures: burned out lamp, power failure. & flashing rate control.
There are two light outputs (max. 1A load/output). Practically, for example,it can connect two single DL32S low intensity aviation lights at the same time, or 1 dual DL32D aviation lights.
With a Form C dry alarm relay (NO&NC), the control box is capable of transmitting the obstruction lighting system’s failure to users’alarm devices, when light failure or power-off failure.
A external PT01 photocell is used for automatically switching on and off the obstruction lighting system from dusk to dawn, or we can put an internal photocell for easy installation if requires.
Bypass switch on interface panel allows users to bypass the photocell for permanently lightening or testing.
CBL02A outdoor controller covered by an aluminum enclosure and assembled with cable glands, is a perfect IP65 model for harsh environment use.
• On/off Main Power Supply
• Control two lights flashing synchronously
• LED indicators for light, power and photocell
•“Service+Service”/”Service+Standby” adjustable when double lights used
• Two light-outputs, 1-2 selectable upon actual application
• Each light output load maximum 1A
• Steady and Flashing adjustable
• External photocell with prewired shielded cable, easy to maintain
• Photocell bypass switch—can switch ON/OFF the light when the photocell is not available
• One dry contact relay (From C, NO&NC) for alarm output of lights and power
• Circuit breaker against overload and short-circuit
• Surge protector(up to 2KV) against voltage fluctuation and lighting strikes.
| Item | CBL02A | |
| POWER SUPPLY | Input voltage | 48V DC |
| Max.Load/Output | 1A | |
| Flash Rate | Steady/Flashing(20FPM), adjustable | |
| Photocell sensitivity | 70-100 Lux | |
| Photocell bypass | Auto/Manual adjustable | |
| Alarm type | NO & NC, dry contact relay | |
| Numbers of Alarm Output | 2*contact relay for lights, power and photocell | |
| MECHANICAL STRUCTURE | Enclosure Type | Outdoor |
| Enclosure Material | Aluminum alloy | |
| Protection | IP65 | |
| Net Weight | 1.2kg | |
| Dimension (H*W*Depth) | 188mm*120mm*78mm | |
| Operation Temperature | -30˚C ~ +70˚C | |
| Operation Humidity | 0-95% RH non-condensing | |
| Mounting | Wall mounting or U-bolt mounting | |
Mounting dimension(mm)
